1. 單色流水燈測試

硬件準備：8P杜邦線1根

接線說明：使用1根8P杜邦線連接ARM核心板P019~P026接底板單色流水燈模塊的JP15。

跳線說明：無

分別為：P019-I1，P020-I2，P021-I3,P022-I4,P023-I5,P024-I6,P025-I7,P026-I8.

實驗現象：8個LED燈依次熄滅

源碼資源如下：

/*****************LPC2103 GPIO流水燈實驗***************

系統設置: Fosc、Fcclk、Fcco、Fpclk

#define Fosc 12000000

#define Fcclk (Fosc * 5)

#define Fcco (Fcclk *4)

#define Fpclk (Fcclk / 4) * 4

Fpclk=60000000

接線說明：使用 1根 8P杜邦線連接 ARM 核心板 P019~P026接底板單色流水燈模塊的

JP15，分別為：P019-I1，P020-I2，P021-I3,P022-I4,P023-I5,P024-I6,P025-I7,P026-I8.

現象：LED燈依次熄滅

技術網站:http://www.eeskill.com

淘寶店鋪:http://cepark.taobao.com

作者：eeskill

時間:2017.07.01

******************************************************/

#define IN_MAIN

#include "config.h"

#include "LPC2103_lian.H"

#include "ADC.h"

#include "ExtInterrupt.h"

#include "I2C.h"

#include "IAP.h"

#include "Legacy_GPIO.h"

#include "RTC.h"

#include "SPI.h"

#include "SSP.h"

#include "Time.h"

#include "UART.h"

#include "WatchDog.h"

#include "ISR.h"

#pragma import(__use_no_semihosting_swi)

const uint32 tab[]={

0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80,

0x40,0x20,0x10,0x08,0x04,0x02,

};

uint32 i;

void IRQ_Exception(void)

{

}

//**********************函數定義************************

void delay(uint32 dly);

//**********************主函數**************************

void Main(void)

{

TargetInit(VPBDIV_DATA, PLLCFG_DATA, MAMTIM_DATA); // don't delete

while((PLLSTAT & (1 << 10)) == 0); // can delete

p019_gpio; //將端口設置為gpio口

p020_gpio;

p021_gpio;

p022_gpio;

p023_gpio;

p024_gpio;

p025_gpio;

p026_gpio;

//p019-p026設置為輸出

gpio_out(p019|p020|p021|p022|p023|p024|p025|p026);

delay(1);

while(1)

{

for(i=0;i<14;i++)

{

IO0PIN=(IO0PIN&0xF807FFFF)|(uint32)(tab[i]<<19);

delay(900);

}

}

}

//************************延時**************************

void delay(uint32 dly)

{

uint32 i;

for(;dly>0;dly--)

{

for(i=0;i<5000;i++);

}

}